by Stefan | Sep 11, 2022
Yes, panels must be balanced. If a panel is not painted, sealed or veneered equally on both faces, the panel is considered unbalanced and is likely to distort, cup or twist, putting tremendous pressure on the mounting system. This can lead to the centre of large...
by Stefan | Sep 11, 2022
Yes, the Fastmount panel mounting system has a comprehensive 2-year warranty. This warranty covers manufacturing defects and ensures reliable performance when products are used according to specifications. For complete warranty terms and conditions, view the Fastmount...
by Stefan | Sep 11, 2022
Fastmount adhesive-fix clips are designed with a SuperGroove® backing, which mechanically engages into a suitable 2-part epoxy adhesive. This design creates a strong, permanent bond between the clip and substrate without requiring mechanical fasteners. Tests should be...
by Stefan | Sep 11, 2022
Fastmount clips have pull out loads (strength) ranging from 5kg to 32kg (11-70lb), depending on the specific clip type. The clip’s pull out load is noted on its Product Sheet, providing clear guidance for selecting the appropriate clip for your panel weight and...
by Stefan | Sep 11, 2022
Male clips can break due to mishandling, so ensure male clips are not installed until the final fit. If installation is required off-site, Fastmount recommends using the PC-VM1, PC-VMX, LP-SMX or Very Low Profile Range. Over-tightening during installation represents...
